BWT Bestbarista ROC COFFEE

BWT Bestbarista ROC COFFEE PLEASE NOTE: Regardless of your water's hardness, it must be safe for drinking before being run through the RO system. Though not required, it is recommended to prefilter raw water through a BWT Besttaste filter cartridge in order to extend the life of the membrane cartridge. The BWT Bestbarista ROC COFFEE is a robust reverse osmosis system from BWT that is designed as a solution to treat water of all degrees of hardness. Using two cartridges, a high efficiency Bestaqua reverse osmosis membrane and a Bestbarista ROC COFFEE remineralization cartridge. The Bestbarista remineralization cartridge optimizes water for coffee brewing with the reintroduction of magnesium and silicate to improve flavor. Because the Bestbarista ROC Coffee can be used with raw water of any quality, the system guarantees consistency of the finished remineralized product regardless of where you are. The entire system is compact at just 10.9" W x 11.7" D x 19.9" H and easy to install with an M ¾" fitting for feed water, M 3/8" fitting for permeate, and 8mm John Guest fittings for both the concentrate and the external tank. RO System Dimensions: 10.9" W x 11.7" D x 19.9" H Why You Want the BWT Bestbarista ROC COFFEE Scale and Corrosion Protection Reverse osmosis systems provide protection from both mineral buildup and corrosion by filtering out a wide range of substances that can cause harm or damage to your machine. These substances include, but are not limited to: Limescale [calcium carbonate], Gypsum [calcium sulphate], Particles, Calcium, Sodium, Potassium, Sulphate, Carbonate, Chloride, Off-Flavors, Chlorine Perfect Remineralization After water is filtered through the membrane cartridge, it passes through the Bestbarista ROC COFFEE cartridge for remineralization. The Bestbarista cartridge releases magnesium and silicate back into the water to optimize it for coffee. Magnesium serves as a powerful flavor carrier and stabilizer while silicate helps to improve mouthfeel while also contributing to flavor stability. The result is a system that not only protects your equipment from harm, but also produces water that will ultimately brew better coffee. Complete System Monitoring Using the companion app called ROC Control you can control factors such as water rinsing parameters to control TDS targets, set reminders and alerts for changing filters, and receive alerts when the system requires your attention to ensure that your water is safely and effectively treated for your machine RO System Technical Data Operating Conditions Min. Feed Water Flow Rate min. 4.2 L/min = 250L/h Concentrate Flow Rate approx. 2.0L/min= 120L/h Feed Water Pressure 0.15–0.4MPa= 1.5–4bar Feed Water Temperature 5–30°C / 41-86°F Ambient Temperature 5–40°C / 41-104°F Power Power Supply 220~240 V/ 50~60 Hz/ 10 A Equipment Fuse T1.25AL250V Power Consumption 200W, Standby <3W Equipment Connection IEC-320 Cold Appliance Connection Cable 1.8m, CEE 7/4, IEC-320 Protection Class IP 21 Feed and Drainage Lines Feed Water M ¾" Permeate M 3/8" Concentrate John Guest 8mm External Tank John Guest 8mm Filter Cartridge Technical Data Operating Conditions Bestbarista 14 Coffee Bestaqua 14 Membrane Nominal Flow Rate (bypass closed) 120L/H 120L/H Operating Pressure 2-8 bar ~7 bar Inlet Water Pressure (min.) >1.5 bar >1.5 bar Water Temperature (min-max) 4-30°C / 39.2-86°F 4-30°C / 39.2-86°F Ambient Temperature (min-max) 4-30°C / 39.2-104°F 4-30°C / 39.2-104°F Ambient Temp Storage (min-max) 4-30°C / 39.2-104°F 4-30°C / 39.2-104°F Installation Position Vertical Vertical Change After 6-12 Months 12-24 Months